How to Bring Down pH in a Pool? Robot Pool Cleaner Tips for Better Water Balance
Having your pool water perfectly balanced is important for more than just comfort – it’s also equally important for your equipment. If you have a high pH level, you may be dealing with cloudy water, scaling on pool surfaces, and decreased chlorine efficiency. Below, we will go into how to lower the pH in a pool and why certain devices, such as a robot pool cleaner can also assist with your ongoing maintenance.
Contents
What Does High Pool pH Do?
High Pool Water pH (over 7.8) Problems. Hi pH in your pool can cause a lot of problems:
Forming scale on the pool surface and equipment
Cloudy water
Eye and skin irritation
Reduced efficiency of chlorine
This is why it is important to tackle high pH levels immediately while still following the recommended cleaning routine of your robotic pool cleaner or pool robot cleaner.
How to Decrease Your Pool’s pH Safely and Properly
Use pH Reducers
To lower the pH in your pool, you have to use pH-lowering chemicals such as muriatic acid or dry acid (sodium bisulfate). These acids neutralize alkalinity and reduce the pH.
Step 1: Test your water with a pool test kit or digital meter.
2: Determine the Amount of Acid Needed Based on Your Pool Size and Current pH. You’re really going to want to know the volume of water in your pool before you start this process.
Step 3: Add acid slowly to the deepest end of the pool with your pool vacuum or robot pool cleaner operational to ensure it’s getting distributed evenly.
Step 4: Test your water again in 4–6 hours, then repeat if needed.
The cleanliness of the water is maintained by robots
A clear pool makes it easy to keep water chemistry at its best. Algae and debris build-up can cause pH to fluctuate. This is where a good pool cleaning robot comes in.
A robotic pool cleaner does more than just vacuum the bottom; it also scrubs the walls, which works against the growth of algae.
Devices such as the pool cleaner or pool vacuum-for-algae are quite useful,l but they are difficult to use. By contrast, pool vacuum robot models do the job for you.
Efficient and reliable choices like Beatbot are available. Beatbot AquaSense 2 Ultra, Beatbot AquaSense 2 Pro, and Beatbot AquaSense 2 are precision robot wall-climbing pool cleaners to remove algae and wall debris, to provide a clean swimming pond.
Maximize the circulation and filtration of your pool
Low flow can also give rise to pH surges. Here’s how to address it:
Be sure that your skimmer and pump are working properly.
Inspect the pool booster pump for good water pressure.
Run the filter system at least 8-12 hours per day during peak season.
If your pool has a Maytronics pool cleaner attached to the pool, it should be regularly serviced to prevent clogs, which may restrict water flow.
How to Drain an In-Ground Pool Without a Pump (If Necessary)
In rare cases, you may need to remove some of the water. If you don’t own a submersible pump:
via a garden hose and siphoned that way.
Siphon way above into an appropriate draining area.
Be careful not to empty the pool completely, which could lead to structural problems.
How to Acid Wash a Pool for Algae Control
Algae adhering to the water can contaminate the pH. Voted sexiest looking pool equipment! If you are tired of that old black, gray, blue, white, and even the giant floating elephant, and “Why is this here?” Wanda the Whale pool cleaner, then THIS sexy baby is the one for you! If your wall-climbing pool cleaner or robotic pool cleaner leaves the walls or floor of the pool untouched, THEN YOU HAVE THIS THING.
Drain the pool and spray the walls with water-diluted muriatic acid.
Clean well, and then rinse with clean water.
*Replace pool water and retest pH prior to swimming again.
Does a Pool Robot Pick Up Algae?
Yes – The advanced swimming pool robot cleaner models are designed to remove algae, and with the right filtration system. But for heavy infestations, you may want to consider chemical treatment and vacuuming for the pool as an addition.
Prevent Future pH Spikes
Here are tips on how to maintain your pool pH levels proactively:
Test the water weekly
Keep Cleaning Consistently with a robot pool cleaner
Do not just pour in fresh water.
Shock the pool as needed
Maintain alkalinity between 80 and 120 ppm
Conclusion
Maintaining your pool’s pH is crucial for swimmer comfort, proper equipment lifespan, and effectiveness of pool chemicals. Using the cleaning functions of a robotic pool cleaner can cut down on debris and algae, both of which affect pH. By pairing these tools with smart water balancing, you can keep a pool healthy and crystal clear, whether you’re using a Beatbot robotic pool cleaner or a manual pool vacuum.
